Model #E66 Magnavox misc television

  • No Image Available - Fidelitone
    3 Results

Question and Answers

Q:

Electroluxe DRYER Code E66 - WHat is the part necessary to fix and how much is it?

A:

That E66 code indicates that the exhaust thermal limiter is tripped or that you have a wiring failure in that circuit. That fuse is on the outlet exhaust tube. The technical explanation is shown in the first image below. The second image shows the wiring diagram for the dryer. You will normally need to unplug the dryer and check the continuity of that thermal limiter fuse using a volt/ohm meter. If that fuse is blown, then you can order a new one from this page: Limiter for Electrolux Dryer Model EIMED55IIW0 . That link has the price for the part. Unplug the dryer before installing that part.

Note: If that exhaust thermal limiter fuse was blown, I recommend that you check the exhaust air path to the outside of your home. A clogged or restricted exhaust air vent path can cause that fuse to blow. Failure to correct that type of problem can cause the replacement fuse to blow again shortly after it is installed.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 28, 2012
Q:

My kenmore washer gave me an error code that isn't in the error code list I recieved with my last question.

A:

I believe you may have mis-counted the flashes. I have not heard of an E66 code. It can get confusing if you do not cover one or the other while counting the flashing start light and the row of 5 lights. Cover the start light so that you can not see it flash and take your count of the 5 lights and then cover the row of 5 lights and take a count of the start light. You will likely come up with a different count.

Read More
Joey S -
Sears Technician
September 15, 2010