Model #DUS-407-19 Caloric dishwasher

  • Tub Details
    3 Results
  • Tub Details
    3 Results
  • Tub Details
    3 Results
  • Tub Details
    3 Results
  • Frame Details
    3 Results
  • Frame Details
    3 Results
  • Frame Details
    3 Results
  • Frame Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Door Details
    3 Results
  • Motor, Pump, And Spray Arm Details
    3 Results
  • Motor, Pump, And Spray Arm Details
    3 Results
  • Motor, Pump, And Spray Arm Details
    3 Results
  • Motor, Pump, And Spray Arm Details
    3 Results
  • Detergent Cup
    3 Results
  • Detergent Cup
    3 Results
  • Counter Panel Details
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Counter Panel
    3 Results
  • Rack Details
    3 Results
  • Top Details
    3 Results

Question and Answers

Q:

error code F 19

A:

There is no "F19" fault code listed. I added a link below to use with the instructions on how to bring up a list of stored error codes and a list of error codes.

What does an error message L7h mean on my Kenmore Elite HE5t washer?

Read More
Joey S -
Sears Technician
May 27, 2010
Q:

19.v battery charger

A:

If the battery fits, the 19.2v lithium-ion battery should charge okay but it is normally not a good idea to use the incorrect charger for the long run. The charging cycle is normally different for the lithium-ion battery compared to the ni-cad battery. 

Read More
Lyle W -
Sears Technician
April 15, 2013
Q:

(code F50 ) Put power to the washer after 2 days. Washer ran from 40-7 minutes,stopped on the spin cycle with the 7 flashing , then lost power.

A:

Hi Reggie,

Thank you for submitting a question to Manage My Life.

The F4 error is a recirculation pressure switch failure. This error code and its causes are explained on the tech sheet I included in my previous response. This document also contains the diagnostic testing procedures for your washer. Here is a link to your previous question; model # 110.22036100 code 50 and now no power kenmore . This particular washer does not have an error code containing 50. The "50" you saw was most likely the time display.

You will now need to check for;

  1. Plugged recirculation hose (black hose).
  2. Plugged or disconnected air tube (clear tube).
  3. Wires to the recirculation pressure switch disconnected or not connected correctly.
  4. Failed recirculation pressure switch. Switch (black wire, tan wire) contacts should be open with pressure applied and closed with no pressure.

I am including the disassembly instructions for this washer in the images below.Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

The diagnosis of this issue will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have an ohm/volt meter and are confident in your technical abilities, please reply below and I will be happy to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
November 30, 2011
A:

Hi Reggie, Glad to hear you are up and running. Please keep Manage My Life in mind for all of your do-it-yourself projects. Landell

Read More
Landell -
Sears Technician
December 05, 2011
See more answers