Model #DU948PWKB1 Whirlpool dishwasher

  • Frame And Console/literature
    3 Results
  • Inner Door
    3 Results
  • Tub Assembly
    3 Results
  • Pump And Motor
    3 Results
  • Upper Dishrack And Water Feed
    3 Results
  • Lower Dishrack
    3 Results
  • Miscellaneous/optional
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I install the parts to the Whirlpool dishwasher upper rack?

A:

The image below shows a parts diagram for your dishwasher. Remove the track stops (Key 17) on each side of the dishwasher and pull the upper rack out. The wheels and spray arm clip onto the new rack in the same manner that they were attached to the old rack. Remove the wheels from the old rack and install them on the new one. Remove the clips that secure the spray arm and pull the spray arm off of the old rack. Reinstall the spray arm on the new rack in the same location as it was on the old rack. Make sure the spray arm spins without hitting the bottom of the new rack. Push the new rack back into the track and reinstall the rack stops.

Read More
Lyle W -
Sears Technician
August 15, 2008

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show