Model #DSC-P1 Sony cameras, all

  • Cabinet Parts
    3 Results

Question and Answers

Q:

That would be the p1,p3 connector on the EOC.

A:

This appears to be additional information about your previous question. I provided a wiring diagram and other information that should help you check that wiring in a response to your previous question about this issue. Here is a link for that thread: kenmore elite built in convection oven model 790.48039801. would like to know wire color code for the p1,p3 connector. i may have connector reversed. Elements d

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
November 29, 2011
Q:

Transaxle shifting lubrication Part #6292 P1

A:

Thank you for your question.

I have seen these be very difficult to remove. What happens is the screw is metal and the housing is aluminum and it will start to corrode. You can try a product called PB blaster (this is the best penetrating product I have used) to help break up the corrosion. Then tap the end of the wrench to loosen it. The shock from the hammer tap might break it loose.

In some instances, the screw or the housing breaks but that does not happen often. I hope this is helpful.

Please let me know if you need further assistance, by replying below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 19, 2011
Q:

kenmore elite built in convection oven model 790.48039801. would like to know wire color code for the p1,p3 connector. i may have connector reversed. Elements d

A:

I provided a wiring diagram and a drawing of the control board for that oven in the image below. That information may help you check that wiring. NOTE: Shut off the house circuit breakers for the oven (or remove house fuses) to completely disconnect electrical power to the oven before accessing and checking internal components and wiring . If none of the elements are heating, I recommend that you check that thermal circuit breaker on the outside back wall of the oven cavity. That component will interrupt L2 IN voltage to the control board if it is tripped. It will have a red reset button. Try resetting that thermal circuit breaker if necessary to fix this problem.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
November 29, 2011