Model #DSC-H50 Sony cameras, all

  • Overall Assy
    3 Results
  • Fr Panel 1
    3 Results
  • Fr Panel 2
    3 Results
  • Fr Panel 3
    3 Results
  • Rear Cabinet
    3 Results
  • Lcd Section
    3 Results

Question and Answers

Q:

I am installing a B&S Intek I/C engine and need to know how to connect the throttle linkage to the engine. Model# 12S432, type# 0036, code# F8.

A:

Thank you for your question on the change out of the engine.

I understand that you want to be able to control the speed of the engine from behind the handle bars.

However this is a standard replacement engine and has all the controls on the engine it self and I do not see any type of cable clamp holder on the side of the engine for installing a remote throttle cable.

I would suggest looking closely at the housing next to the throttle to see if there is a hole for a clamp to be screwed into for holding the throttle cable.

Also is there a hole in the throttle arm that would accept the hook on the end of the throttle cable.

It should have a choke lever and a gas valve cut off and a friction throttle control on the engine itself.

Please let me know what you see at that locations since I cannot get a picture that close to see if it has those holes

Sam A.

Read More
Sam A -
Sears Technician
May 04, 2012
A:

Thank you for the update. You may be able to use the same clamp and screw off the old engine if you still have it. Also you will have to loosen the friction damper for the throttle behind the panel, so your remote throttle cable will be able to move the throttle control. You may have to remove the cover to see the friction damper. Sam A.

Read More
Sam A -
Sears Technician
May 04, 2012
See more answers
Q:

Cracked camera body

A:

Thank you for your question.

I can understand your concern for the camera's performance after the accident.

Depending on how hard the impact was as to whether there is any internal concealed damage.

It looks like you can get most of all the parts for the case and body on the parts list.

I would suggest that if you want to order the cracked part you should, but you may want to take it to a camera repair center to replace the part and they can examine for any other damage.

If you take any pictures with it and if the crack will leak light into the film chamber then it is a problem. If it is on an isolated part on the outside that is easily repaired I would replace that for no other reason than for how it looks.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 21, 2011