Model #DRSR495EG6WW Ge residential dryer

  • Backsplash, Blower & Motor Assembly
    3 Results
  • Front Panel & Door
    3 Results
  • Cabinet
    3 Results
  • Drum
    3 Results

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer does not turn off in sensor cycle

A:

The advancement of that time in the sensor dry cycles is controlled by a circuit board inside the console. That circuit board is circled in red on the wiring diagram in the image below. I recommend that you unplug the dryer and check the wiring connections on that circuit board. If the wiring connections are okay, then you will probably need to replace that circuit board. You may see a burnt spot on the control board that indicates that it is apparently damaged. The part number for that circuit board is WE04X10102. You can order that part from this page: Control Board with Buzzer Part WE04X10102 for GE Dryer Model DRSR495EG6WW.

 

Be sure that you unplug the dryer before accessing internal components and replacing parts.


If you need more help, reply with additional details and we will assist you further.

 

 

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services Dryer Repair. 

Read More
Lyle W -
Sears Technician
March 19, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show