Model #DR-MV5SUC Jvc dvd/vcr combo

  • Cabinet Parts
    3 Results

Question and Answers

Q:

What does dr mean? AGQ7000ES1 Frigidaire Dryer

A:

Thank you for your question and I understand your concern.

I understand that "dr" is displayed but this what your details says; My dryer won't start. I press start and I get a flashing "dr," what does this mean?

Since I do not understand what the details say, I can say that "dr" means the control does not detect the Door being shut or the door is shut and the door switch is not closed.  Check that the door is closed and the door catch is not broken, and nothing is stopping the door from closing like it being bent or clothes.  If the door is shutting properly, it could have a faulty door switch. The door switch can be disconnected and tested for continuity with an Ohm meter. With the door switch button pushed in, the Ohm meter should measure continuity when measuring across the orange and brown wires. Disconnect the power cord from the power source before servicing.

I added an image below with instructions for accessing the door switch.  If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link:Sears Home Services.

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

 

Read More
Joey S -
Sears Technician
April 30, 2013
Q:

Why is my Kenmore range displaying the letters "dr"?

A:

Press the CLEAR button to try and clear the display. The "dr" indicates that the door is open when you are trying to start a self clean cycle. This can be caused by a failed oven door switch. You could also have a bad oven control board.

If the CLEAR button will not clear the display, try pushing in on the door switch and see of the oven attempts to lock the door. If it does, then press the CLEAR button as soon as the locking procedure is complete. Continue to hold in the door switch during the entire locking and unlocking process. This may reset the locking mechanism and clear the display. If not, then you will likely need a service technician to diagnose and repair the range.

If you need more technical help with this problem, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
July 28, 2008
Q:

Craftsman lawn tractor dr belt

A:

Thank you for your question.

I am sorry you are having a problem with replacing the belt on the tractor. I have checked the dimensions of the belt and it should be 1/2" x 90". The easiest way I have found to replace the drive belt is to remove the mower deck. Once the deck is removed, you have better access to the belt. I have provided you the instructions for removing the deck and installing the belt. After you have the belt on, I recommend testing the operation before installing the deck. If it is ok go ahead, clean the bottom side of the mower deck, and reinstall it.

Please let me know if you need further assistance on the repair of the tractor.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 25, 2011
A:

Thank you for your question.

I am sorry you are having a problem with replacing the belt on the tractor. I have checked the dimensions of the belt and it should be 1/2" x 90". The easiest way I have found to replace the drive belt is to remove the mower deck. Once the deck is removed, you have better access to the belt. I have provided you the instructions for removing the deck and installing the belt. After you have the belt on, I recommend testing the operation before installing the deck. If it is ok go ahead, clean the bottom side of the mower deck, and reinstall it.

Please let me know if you need further assistance on the repair of the tractor.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 25, 2011
See more answers