Model #DC330K TYPE 10 Dewalt saw sabre

  • Sabre Saw
    3 Results

Question and Answers

Q:

I have a Craftsman 10" Contractor Table Saw the blade stops when trying to cut any type of wood.

A:

Thank you for your question.

I am sorry you are having a problem with the saw. Without a model number, I will only be able to give you general information. First, unplug the saw, remove the belt, and check the pulleys. I have seen the key come out and allow the pulley to slip on the shaft. If you cannot slide the pulleys on the shaft, they should be fine. Next check the condition of the belt. If it is cracked or glazed, it should be replaced. If the belt is fine, go ahead and reinstall it. The image below shows how to adjust the motor. The weight of the motor is what tensions the belt. I have also found a manual for a belt drive table saw. Click here to load the manual.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 30, 2012
Q:

owner/service manual for rockwell [ delta] 10" tilting arbor bench saw model 34-426 type 1

A:

Thank you for your question.

I can understand wanting to have a manual for your Delta table saw.

I have contacted the source and they do not have the manual readily available.

I am going to give you the phone contact information and if you call them they will get your contact information and will see if they can get it from the archive files.

Delta .

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 01, 2011
Q:

10 year Craftsman tractor #917272464: What is the hydrostatic oil type for this specific unit, and how much should I use? Thank you.

A:

Thank you for your question.

I will be happy to assist you. The transaxle in the tractor uses mobile one 20W50. I have posted an image below that shows how to check the oil level. Once you are ready to check the oil level, remove the four bolts in the draw bar and take it off. Then clean all of the debris from the top of the transaxle before removing the plug to check the oil.

Please let me know if you need further assistance on the repair of the tractor.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 14, 2011