Model #BV2500 TYPE 7 Black & Decker blower, electric

  • Blower Assy
    3 Results

Question and Answers

Q:

how do I repair spinning agitator

A:

Thank you for your question and I understand your concern.

As Joseph P. suggested in the first response; adding the model would be needed in order to know which type of agitator the washer has. Joseph added a link with instructions how to remove the type of agitator your model likely has. I also added the instruction below.

To access the agitate dogs:

  1. Pry the agitator cap off.
  2. Remove the spring retainer using the male square end of a 1/2 inch drive ratchet extension. Turn it counterclockwise to remove.
  3. Remove the spring
  4. Lift the augur up and turn it upside down while placing you hand over the top. You now have access to the agitate dogs.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post along with the model number of your washer.

Read More
Joey S -
Sears Technician
December 13, 2011
Q:

HOW TO REAIR WASHING MACHINE AGITATOR

A:

Thank you for your question.

I am sorry you are having a problem with the washer. If the top portion of the agitator does not catch when turned counter clockwise, the dogs are worn. The dogs allow the top portion of the agitator to ratchet and pull the clothes into the water. The part number for the dogs is 80040 and can be ordered from our parts website: Sears Parts Direct .

To replace the dogs please follow these steps.

  1. Remove the fabric softener dispenser from the top of the agitator.
  2. Remove the agitator cover by pulling it up.
  3. You should see a plastic piece that has a square hole in the center. You need to insert a 1/2 inch drive extension into the hole. Then turn it counter clockwise to remove this retainer.
  4. Remove the cam out of the top portion of the agitator and replace the dogs.
  5. Reassemble the washer in the reverse order and test the operation.

I have provided you with an image below to aid in replacing the dogs. Your model is slightly different from the image but the dogs sit in the cam the same.

Please reply below if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 13, 2011
Q:

Kenmore 7 - sewing machine

A:

Thank you for your question.

I can understand wanting to know when the machine was made.

I can tell you that your machine model series started production in 1992 through 1995. But I cannot tell exactly when your model was made.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 28, 2011