Model #BU-10L-122 Hydro-gear lawn/garden sub-assemblies

  • Pump Bu-10l-122 (71/917)
    3 Results

Question and Answers

Q:

I have a front laod washer model 110.47081600 and the display is flashing F21 and the washer won't take comands.

A:

I added a link below from a previous answer that will answer your question.

What does "F21" code mean that displays on my HE 5t washer?

Read More
Joey S -
Sears Technician
July 08, 2010
Q:

"kenmore elite oasis washing machine. Worked fine last night- doesn't have power today- checked plug and flipped circu breakers" Is there some sort of reset bu

A:

I assume that you plugged a small appliance or lamp into that outlet plug to verify that it is working. If not, I recommend that you check it in that manner.

If the outlet plug is working, then you could have a bad outlet cord, a wiring failure, a failed user interface control board or a bad main machine control board that is causing this failure.

You can unplug the washer and check the wiring connections on that P13 plug of that machine control board. The first image below shows how to open the console on this type of washer. The second image shows a wiring diagram for a typical Kenmore Elite Oasis washer. NOTE: Your washer may be slightly different than the one shown below depending on your exact model. Reply with additional details and the full model number of your washer if necessary.

The third image shows a drawing of the components and a diagram of the machine control board. This information will help you check the wiring connections. If you find no problems with the wiring connections, you can perform the quick test that is described in the 4th image. That information may help you determine the cause of your problem. Be sure that you unplug the washer before accessing internal components. NOTE: I do not recommend that you perform any live voltage checks at this time unless you are completely confident in your technical ability to safely execute them. Wear proper safety equipment (insulated rubber electrical safety gloves and safety goggles) if you do need to check voltage. Unplug the washer as soon as any live voltage checks are completed.

You can order parts from the Sears PartsDirect website.

If you need more help, reply with additional details and we will assist you further.

If you get to a point where you need to have a service technician diagnose and repair this failure, you can schedule one through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 20, 2011
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
December 20, 2011
See more answers
Q:

Kenmore electric range 79090319010 13 months old and left rear surface element does not work,light is on and in does work when I put in right front bu

A:

Your details point to a failed burner switch, terminal block or wiring problem on that left rear element. I recommend that you unplug the range and examine that terminal block for the element first. Here is a link for a video that shows how to access and replace that terminal block: Terminal Block Replacement . If that terminal block is okay, then you may need to replace that burner switch. Here is a link for a video that shows how to replace that burner switch: Infinite Burner Switch Replacement . You can order parts from the Sears PartsDirect website. Be sure that you unplug the range before accessing internal components.

If you are unsure which component to replace or you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this burner failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
February 08, 2012