Model #BT85LK-3T Magic Chef range sub assemblies

  • Body
    3 Results

Question and Answers

Q:

Problem with kenmore washer HE 3t

A:

Thank you for your question and I understand your concern.

The error code "F/dL" indicates the door has failed to lock or it may have locked but the control board did not detect the door being locked. It most likely has a faulty door lock assembly. Replacing the door lock assembly will likely resolve the problem. If it does not resolve the "F/dL", then it may need a new machine control board or it could have a loose wire connection between the door lock assembly and the machine control board.

Removing and replacing the door lock assembly is a fairly easy procedure. I added a second response with an image of the procedure. NOTE: Disconnect the power cord from the power source before servicing.

Read More
Joey S -
Sears Technician
January 17, 2013
A:

Veronica: I added an image below with the procedure of removing and replacing the door lock assembly. If you feel confident in replacing the door lock assembly, be sure and disconnect the power cord from the power source before servicing.

Read More
Joey S -
Sears Technician
January 17, 2013
See more answers
Q:

How do I replace the water pump in my Kenmore washing machine?

A:

I have included a set of illustrated instructions (See below). These should step you through the process of removal and replacement of the water pump in your HE 3T. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you require further assistance please resubmit question with a complete model number and more details. I will be looking forward to helping you again in the near future.

Read More
Landell -
Sears Technician
January 25, 2010
Q:

front loader won't lock has fdl code

A:

I see that Raquel F has given you a link to an answered question for the Fdl error cod. I would like to add the following information.

The "F/dL" is indicating a door lock error. Even though the door may be locked, the control board does not detect it being locked. The door lock assembly may have failed or it could be a loose wire connection between the door lock assembly and the machine control board. It could also have a machine control board failure too.

This type of failure will require a service technician to diagnose the failure. It could be just a failed door lock assembly but it could also be a loose wire connection or a failed machine control board.

I recommend calling a service technician to diagnose and repair your washer.

If you need further assistance, please submit more details below.

Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Mark T -
Sears Technician
September 13, 2010