Model #BD-P1400 Samsung dvd systems

  • Cabinet Parts
    3 Results

Question and Answers

Q:

oven too hot 675

A:

Thank you for your question.

I can understand wanting to replace the control because of the high heat.

To replace the control:

First REMOVE POWER to the range.

Pull the range out from its location and locate and remove the screws that secure the upper back cover panel.

Once you have the panel removed, locate and remove the four screws that secure the electronic control to the control panel.

With the other control in hand replace connector for connector one at a time and any loose individual wires if it has any. (mostly they should be plug in connectors)

Once you have the wiring changed to the new control, then re-install the control in the range control panel and re-install the back panel and restore power to the range.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 12, 2011
Q:

had code 42 replace control bd but now not locking door just start flashing

A:

Without having a model number and more information, I would have to say yes, you have a bad door lock assembly if you just replace the control and the door won't lock. You can unplug the washer and check the wire harness connections before replacing the door lock assembly. If the wiring connections are okay then you may need to replace the door lock assembly. If you want us to provide more technical information that may help you verify this failure, submit additional details including the full model number of your washer.

Read More
Lyle W -
Sears Technician
July 16, 2010
Q:

What is Battery type P-1400, as is in specifications for Craftsman C3 19.2- volt 5-tool kit number 11445?

A:

The battery in kit number 11445 is a nicad battery. If you look on the batteries the lithium ion batteries will be marked lithium ion.

If the battery says "die hard", it is a nicad battery.

Read More
Jimmy K -
Sears Technician
December 22, 2009