Model #BDCDMT120-2 TYPE 1 Black & Decker drill cordless

  • Drill Assy
    3 Results

Question and Answers

Q:

I have a Sears Garden tractor, type 5000, with a 52" cut. I am having trouble raising the deck above 1 1/2" to cut grass.

A:

Without a model number of the tractor, I don't know what kind of deck adjustments you have.

Get the correct model of the tractor from under the seat and go to [www.managemylife.com]. Enter the model number in the "manual search" field on the home page.

Look in the owners manual for the instructions for adjusting the deck and installing the deck. The deck lifting arm needs to be all the way down when the deck is installed. This will give you the full travel of the lift lever to raise the deck farther.

If this doesn't work, send another email and include the model number of the tractor. We will be glad to help.

Read More
Jimmy K -
Sears Technician
July 20, 2009
Q:

dishwasher wont fully drain

A:

Thank you for your question and I understand your concern.

There is likely a partial blockage at the drain/check valve which is threaded into the sump of the pump. The drain hose is also connected to this check valve. You will need to remove all the water from inside the dishwasher before disconnecting the drain hose from the check valve. Once the check valve has been removed; clean the debris from the check valve and also check and clean the port the check valve is threaded into as well. Reinstall the check valve and your dishwasher will likely drain properly again.

I added a YouTube video showing how to access and remove the check valve . This may be the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
December 06, 2011
Q:

Need insight on repairing a new, 1 1/2 year old micriwave

A:

Hello Al. You could have an internal wiring problem or another component failure such as a blown fuse that is preventing the microwave from working. I recommend that you have a service technician diagnose and repair that type of failure. Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as replacing fuses, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Lyle W -
Sears Technician
April 03, 2012