Model #BC-1900 Haier water dispenser

  • No Repair Available
    3 Results

Question and Answers

Q:

kenmore washer/dryer 713gt/bc has no power?

A:

Hi Chris,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your laundry products.

I was not able to find any information using the numbers you gave.

The model number for this product should be located just inside the door or on the back panel. If you are able to locate the model number and give me a few more details I will be happy to assist you in any way I can.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
June 06, 2011
Q:

I have a GE GSD 1900 Series dish washer that doesn't drain the water every time I use it

A:

Thank you for your question.

I can understand your concern for the dishwasher not draining properly all the time.

  • In the bottom inside of the dishwasher there is a grill that has a check valve assembly under it that could be causing the problem.

  • Remove the two screws that holds the cover in place and locate the valve body and nut check valve.

  • Unscrew the nut on the valve body and remove the check valve a look for debris in the valve body.

  • Once cleaned return the check valve and nut back into the valve body and reinstall the grill cover.

  • The other possible location is where the drain hose attaches to the valve body from underneath the dishwasher.

  • You will need to remove power to the dishwasher and remove the lower kick plate and access panel to get to the drain hose check valve on the side of the valve body.

  • Make sure that you have some towels to catch the water when you remove the drain hose.

  • Then unscrew the valve check assembly and examine the rubber check flapper for and debris or curled condition which would prevent the diswasher from draining properly.

  • Replace any damaged or worn parts and re-install.

I have included some pictures of the valve.

I hope this information will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 25, 2010
Q:

Hi. I have a Samsung dryer model # DV219AEW/XAA I bought a belt for it bc the belt was shredded and I put it on but it will only spin slowly now. Any help?

A:

The part number for the belt on that model of Samsung dryer should be 6602-001655. If you received the wrong belt, then I recommend that you return it and order this one.

 

If you have the correct belt, then I recommend that you check the routing of the belt over the motor pulley and around the idler pulley. The first image below shows how the belt should be routed. I added a procedure for accessing and replacing the belt in the second image.

 

This information should help you fix that dryer problem. If you need more assistance, reply with additional details.


I understand that you are trying to fix this problem on your own. If you do get to the point where you need to have a service technician examine the dryer and install the belt, you can schedule service through this link: Sears Home Services Dryer Repair. 

Read More
Lyle W -
Sears Technician
February 26, 2013