Model #BC-1680 Haier air conditioner -room

  • No Repair Available
    3 Results

Question and Answers

Q:

kenmore washer/dryer 713gt/bc has no power?

A:

Hi Chris,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your laundry products.

I was not able to find any information using the numbers you gave.

The model number for this product should be located just inside the door or on the back panel. If you are able to locate the model number and give me a few more details I will be happy to assist you in any way I can.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
June 06, 2011
Q:

I am looking for a walking foot for Kenmore Model 1680 sewing machine. Sears cannot find a part number.

A:

I do not see a walking foot listed for that model. I will research that part further. I will update this thread if I can find one that will work on this sewing machine.

Read More
Lyle W -
Sears Technician
March 15, 2011
A:

Thanks for providing that full model number and the additional information. That will help in our research of this part.

Read More
Lyle W -
Sears Technician
March 15, 2011
A:

Thank you for your question. I doing the research for the walking foot the part number for the Super High bar walking foot is: DP6888 and you can purchase it from: [Sears Parts Direct | www.searspartsdirect.com?sid=MMLxexpertxmerch] . I hope this will help. Thank you for using Manage My Life. Sam A.

Read More
Sam A -
Sears Technician
March 21, 2011
See more answers
Q:

Hi. I have a Samsung dryer model # DV219AEW/XAA I bought a belt for it bc the belt was shredded and I put it on but it will only spin slowly now. Any help?

A:

The part number for the belt on that model of Samsung dryer should be 6602-001655. If you received the wrong belt, then I recommend that you return it and order this one.

 

If you have the correct belt, then I recommend that you check the routing of the belt over the motor pulley and around the idler pulley. The first image below shows how the belt should be routed. I added a procedure for accessing and replacing the belt in the second image.

 

This information should help you fix that dryer problem. If you need more assistance, reply with additional details.


I understand that you are trying to fix this problem on your own. If you do get to the point where you need to have a service technician examine the dryer and install the belt, you can schedule service through this link: Sears Home Services Dryer Repair. 

Read More
Lyle W -
Sears Technician
February 26, 2013