Model #AW-10CR1FV Wintair air conditioner -room

  • Cabinet Parts
    3 Results

Question and Answers


how do you replace a water inlet valve on a Kenmore washing machine?


I see that Celene has given you a good link to an answered question. I would like to add the following information.

  1. Turn the water off to the washer and unplug the power cord.
  2. Once the cabinet is removed, you can remove the hoses to the water valve.
  3. Make sure to have a towel ready because some water will come out.
  4. Locate and remove the screw or screws securing the valve to the washer.
  5. Make sure to make the wires to the valve before removing them. You do not want to switch them.
  6. Once the old valve is removed you can install the new valve in the reverse order.

Make sure to unplug the washer before attempting any repairs.

Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Mark T -
Sears Technician
September 25, 2010

Is there an ingnitor that will actually work for my Amana Big Oven?


The replacement igniter for the oven on this range originally was sold separately from the housing (see parts image below). It appears that the igniter housing for your original igniter is in good shape. I recommend that you carefully remove the element from the replacement igniter (74008064) and insert it into the original igniter housing. You should then be able to mount that igniter on your burner. NOTE: Damage to the new igniter could occur during this repair process. If you perform this repair yourself, avoid touching the igniter element with your fingers. If you are not completely confident that you can switch the housing on that igniter yourself, I recommend that you have a service technician complete this repair. Here is a link for the Sears Service website in case you need to schedule service: Sears Home Services .

Be sure that you have the range unplugged when accessing internal components.

That appears to be the intended fix for this range using that type of replacement igniter. I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
August 15, 2011