Model #ARTICLE#23231 Jvc vcr

  • No Image Available - Wards
    3 Results

Question and Answers

Q:

I am lookig at the article "replacing fuel lines on model 358791580" My question which is the purge side and fuel inlet side of the carb?

A:

Thank you for your question.

I should be able to help you with replacing the fuel line on the trimmer. If you do not have the fuel lines yet they can be ordered from our parts website: Sears Parts Direct .

Once you have the fuel lines click on this link . This video shows how to replace the fuel lines on a trimmer. The trimmer is not exactly like yours but should be close enough to give you an idea on how to replace the fuel line.

Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services . Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 13, 2011
Q:

our whirpool washer model # W10200890A isnt working. she opened it to ass an article of clothing and now it doesn't work. we managed to get the water to drain

A:

Thank you for your question and I understand your concern.

The Whirlpool model number you provided is not a model number; it's a part number of the installation instructions. Based on the installation instructions I believe the model washer you have will be close to a Whirlpool model WTW5100. If this is your model then I would suspect the lid switch is faulty or the lid hinge is not pushing the lid switch actuator in far enough to close the lid switch and complete the circuit to the motor. To access the lid switch remove the screw at the back of the console at each corner. Slide the console forwards and lift it up and hinge it over. You may to just bend the hinge are just a little to insure it pushes the lid switch actuator in enough to complete the circuit to the motor. NOTE: Disconnect the power cord from the power source before placing the console in the service position.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 10, 2012
Q:

Table Saw information

A:

Thank you for your question.

I was able to find the article you are referring. I have contacted the author to have the image changed to a table saw. Please give it a little while for the changes to update. Thank you for pointing this out.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 22, 2012