Model #APAC-80S Amana misc hvac

  • (ac80v3) (ac100v3) (ac120v5)
    3 Results
  • (ac80c3) (ac100c3) (ac120c5)
    3 Results
  • (ac80h3) (ac100h3) (ac100h5) (ac120h5) (ac80vc)
    3 Results
  • (apac-80s) (apac-100s) (apac-120s)
    3 Results
  • (apac-140)
    3 Results
  • (c-80-aca)
    3 Results
  • (c-100-aca) (c-120-aca) (c-140-aca)
    3 Results

Question and Answers

Q:

I need a replacement belt for my air compressor and I don't have a part number or a model number. It was purchased in the 80s. Belt has 6 grooves in it.

A:

Thank you for your question.

I will try to help you with finding the belt. The only way to fine the belt for the air compressor is to measure the belt. If you do not have the belt, loosen the motor mount bolts and slide the motor towards the compressor. Then use string to go around the pulleys. Once you have the string pulled tight, mark the length. Then straighten the string out and measure the length. That is the length of the belt needed. I have found a website that sells the belts in length instead of part number. Please click here to order the belt.

Please let me know if you need further assistance on the air compressor.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 18, 2011
Q:

will an older craftsman snowblower fit my craftsman DLT3000 tractor

A:

Without the model numbers I can only give you general information. Over the years, we have changed the frames of the tractors. I am almost certain the older snow thrower will not be compatible with a newer tractor. If you would like to submit the model number of the tractor, we can tell you what model snow thrower will work.

Read More
Mark T -
Sears Technician
July 27, 2010
Q:

GE P7 upper/lower oven/range - how to remove?

A:

You should find screws through the sides of the opening to the ovens that secure the oven in the cabinet. I provided a diagram in the image below that shows the location of those screws. You may find them only in the upper oven at the top. Remove those mounting screws and you should be able to pull the oven out of the cabinet.

If you need more help, reply with the full model number of your GE P7 oven.

Read More
Lyle W -
Sears Technician
October 24, 2011