Model #ACTION LASER 1500 Epson computer/printer

  • Frame
    3 Results
  • Base Frame
    3 Results
  • Clutch And Gears
    3 Results
  • Cover
    3 Results
  • Feed Assembly
    3 Results
  • Roller Assembly
    3 Results

Question and Answers

Q:

I have a compound miter saw model 137.212140. The laser doesn't work. I replaced the batteries, and it still doesn't work. What is wrong?

A:

Be sure you have all 3 batteries positioned correctly in the laser. Always clean the laser while you have it apart. Blow it out with air pressure or clean it with a soft paint brush.

The laser is activated by the centrifugal force of the blade turning.

If the laser doesn't work after cleaning it and confirming the batteries are positioned correctly, replace the laser.

Read More
Jimmy K -
Sears Technician
April 08, 2009
Q:

calibrate laser saw

A:

If you need advice on the calibration of the laser on a table or miter saw, send another email and include the model number of the saw.

Read More
Jimmy K -
Sears Technician
April 05, 2010
Q:

PTO on Craftsman LT 1500

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. The deck on your tractor is engaged with a cable. With the engine turned off have someone engage and disengage the mower while you watch the cable and the idler arm. The cable pulls on the spring that pulls the idler to tighten the belt. If the cable stretches the spring but does not move the idler, I suspect the pivot point on the idler is rusted. Usually spraying the area down with WD-40 and work it back and forth. I hope this is helpful.

Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 17, 2011