Model #A42-10C Gmc air handler (indoor blower&evap)

  • Air Handler
    3 Results

Question and Answers

Q:

I have a42" Craftsman mower, model # 917.270821. Will a model 917.249890 42" bagger fit this model?

A:

Thank you for your question.



I will be happy to assist you. I looked up the model numbers you submitted. The bagger will fit the tractor.



I hope this is helpful. Please let me know if you need further assistance.



Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
August 07, 2012
Q:

Engine shut down .

A:

Thank you for your question.

Your Tractor uses an Operator Presence (seat) switch that will cause engine to stall if blades are engaged or the brake is released without anyone on the seat. If ample amount of weight is not kept on the seat during operation or the operator is leaning forward the tractor will stall because the Operator Presence (seat) switch senses that the operator is not completely on the seat.

To check Operator Presence (seat) switch:

  1. Lift seat.
  2. Locate wires that connect to Operator Presence (seat) switch under the seat.
  3. Disconnect and clean any debris in the switch connector. Use an ohmmeter to check the switch. When the switch is not pushed, the reading should be 0 ohms (closed). When pushed it should read ol ( open load )
  4. Make sure the connector is fully seated on the seat switch. The connector is a special connector that will short the two wires if it is not fully seated.

I hope this is helpful.

Please click on the following link to order the parts you need. Sears Parts Direct

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please let me know if you need further assistance.

Thank you for using Mange my life.

Mark T.

Read More
Mark T -
Sears Technician
July 27, 2011