Model #WSKS2060T2WB GE residential washers

  • Top & Cabinet Parts
    3 Results
  • Controls & Rear Panel Parts
    3 Results
  • Agitator, Basket & Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor & Pump Parts
    3 Results
  • Suspension Parts
    3 Results

Error Codes

Error Code:



Question and Answers


i have a ge spacemaker washer and when i turn it on the water wont stop and overflows do u know what part i would need the model # is wsks2060t2wb


Hello Tom. That type of problem in your GE Spacemaker Washer is usually caused by a failure of the water level pressure switch (part WH12X10038). There is a possibility that you have a hole or tear in the air pressure hose that is connected between the water level pressure switch and the bottom of the tub. I recommend that you unplug the washer and check that air hose before replacing the pressure switch. If that air hose is okay, then you can order the pressure switch from this page: Water Level Pressure Switch WH12X10038. Be sure that you unplug the washer before accessing internal components and replacing parts.


If you need more help, reply with additional details.


If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services Washer Repair. 

Read More
Lyle W -
Sears Technician
May 17, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show