Model #WH-12-1 JANITROL air-conditioner/heat pump(outside unit)

  • Functional Replacement Parts
    3 Results

Question and Answers


wh won't the blades engage?


Thank you for your question.

I am sorry you are having a problem with the tractor. The cable should tighten up, move the idler and tighten the belt. If the cable is fine and the idler it is not moving, the pivot is likely rust. To fix this loosen the pivot bolt and soak the pivot with WD-40. Then work it back and forth until it is loose. Once free, tighten the bolt and check the operation. I hope this is helpful.

Please let me know if you need further assistance on the repair of the mower.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.
Mark T.

Read More
Mark T -
Sears Technician
June 12, 2012

How do you make adjustments to the in feed and out feed rollers on a 12 1/2" Craftsman Planer?


The adjustments for the rollers are in the owners manual. You can download or print an owners manual for the planer at [].

I am sending you a page from the owners manual that shows the adjustments for some of the rollers in the planer.

Read More
Jimmy K -
Sears Technician
March 23, 2009

A 12" circular saw blade with a 1" hole to use on a radial/table saw with a 5/8" arbor.


Thank you for your question on the bushings for the miter saw arbor so you can use it on a 5/8 radial arm saw arbor.

I found a series of thickness bushings for 1 inch to 5/8.

I will give you a link for these bushings.

Saw blade bushings 5/8 to 1 inch .

I hope this is what you are looking for.

Sam A.

Read More
Sam A -
Sears Technician
July 18, 2012