Model #WD-52628 MITSUBISHI DLP Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

looking for step by step instructions to install a control panel (part ) into a kitchenaid dishwasher ( KUDS01FLSS2 ). diagrams/photos wd also be great. thx.

A:

Thank you for your question and I understand your concern. The control panel is very easy to remove and replace. I added an image below with instructions. NOTE: Disconnect the power supply from the dishwasher before removing the control panel.

I believe you want to remove and replace the interface or control board and not the control panel. The control panel does not include the interface or the control board.

You will still need to remove the control panel in order to remove and replace the interface or control board.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 01, 2010
Q:

We just purchased a used Kenmore Heavy Duty Dryer (Model # 96281100). Wd like manual so we can better understand the control buttons.

A:

I don't have the operating instructions for that exact model available. I did find operating instructions for a similar model that should help you with this dryer. Here is a link for the operating instructions for that similar model: Owner's Manual .

This information should help you operate the dryer. If you need more assistance, reply with additional details and we will try help you further.

Read More
Lyle W -
Sears Technician
March 07, 2011
Q:

Craftsman riding mower blades do not engage

A:

Thank you for your question.

It sounds like you have a problem with the idler arm on the mower deck. When the engagement lever is lifted, the idler arm should move. This releases the blade brakes and tightens the belt. We have one style 42 inch deck that has had this problem. There is a kit that will cure this problem. However, I would need a model number to make sure, if the kit will work on your tractor. Please reply with a model number and I will check our information.

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
October 03, 2010
A:

Jimmy,

I am sorry you are having a problem with the tractor. If the engine is stalling when you engage the blades, the problem is either electrical or mechanical. To determine the problem you need to remove the deck belt from the engine pulley. Then start the tractor and engage the blades. If the tractor stalls with the belt removed, I recommend checking the seat switch. If the connector is loose or the switch is defective the tractor will die. If the tractor does not stall with the belt off, I suspect one of the pulleys is locked up. I recommend turning the pulleys to see if any of them are seized. If the pulleys are fine, double check the belt routing.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
October 23, 2012
See more answers