Model #VL-E620U SHARP 8mm Camcorder

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers


Sharp VL-E620U 8mm Analog Camcorder transfer problem


When something, like the port on the Sharp camcorder is not functioning properly, the solution would probably be to replace it. If there is any other way any expert will find the answer for you. You may want to check out the parts list in the link provided below. Expert response time is 24-48 hours. Thanks for you patience.

Read More
Anna T -
September 26, 2012

Hello Patti,

I'm sorry to hear that you are having problems with the connector on your camcorder and I would like to assist you. The type of jack that your camcorder uses should be serviced by an electronics repair company. I strongly discourage the use of foil or anything else to temporarily tighten the fit of the plug, there is a high risk that it may slip and short out the contacts and it could damage the electronics beyond simple repair.

I suggest dropping your camcorder off to your nearest Sears store to obtain a estimate for the repair of this issue.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
September 28, 2012
See more answers