Model #V-6F CERWIN VEGA Speakers

  • Speaker
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I adjust the v belt

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. I assume you are having a problem with the deck belt. I looked up the part number for the belt and it is part number 144959. If this is the correct belt, I recommend checking the pouting of the belt first. I have provided you with an image below that shows how the belt should be routed. I would also like to mention the belt is going to be loose until the engagement lever is raised. When the lever is raised, it moves the idler to tighten the belt. If the belt still does not tighten when the lever is lifted, I recommend having someone lift the lever while you watch the idler arm. The idler arm should move towards the back of the deck when the lever is lifted. If it is not moving, I suspect the idler rusted up over the winter. The easiest way to free it up is to remove the deck. Then loosen the pivot bolt and spray it with WD-40. Then move it back and forth to free it. Once it is moving, tighten the pivot bolt and check the operation.

I hope this is helpful. Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 28, 2011
Q:

19.v battery charger

A:

If the battery fits, the 19.2v lithium-ion battery should charge okay but it is normally not a good idea to use the incorrect charger for the long run. The charging cycle is normally different for the lithium-ion battery compared to the ni-cad battery. 

Read More
Lyle W -
Sears Technician
April 15, 2013
Q:

Can I use the mower v belt #130969 instead of v belt #131006?

A:

The belts may appear the same but they are different. I wouldn't recommend installing the incorrect belt for the drive system. I strongly suggest installing the correct belt.

Read More
Joey S -
Sears Technician
October 21, 2009