Model #UFSP-10.C AMANA Microwave Commercial

  • Replacement Parts
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

removal of A/C window unit to clean filter

A:

Thank you for your question.

You will not have to remove the front panel to remove and clean the air filter.

There is a front door that hinges down for accessing the filter and sliding it up and out for cleaning.

I have given you the instructions from the owner's manual for this procedure.

Please review the image below and if you need help with a deeper cleaning of the evaporator behind the front panel please reply and I will help you further.

I hope these instructions will help you.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 27, 2011
A:

Thank you for your question on the cleaning of the window ac unit. Since you have a lot of black mold trapped inside the unit. I would agree that it will need to be removed from the window and the cabinet opened and have it professionally cleaned with a widow ac cleaner solution. If you are going to remove and clean the air conditioner yourself I would suggest you get some help to remove it from the window and remove the cabinet if it is not a sleeve type window unit. Please be careful of the fins on the air conditioner because they can be very sharp and cut your hands. You will also need a brush to clean the fins with as well. I will give you a U tube video on cleaning your window ac. You should be able to purchase the cleaner at your local appliance parts supply house. Sam A.

Read More
Sam A -
Sears Technician
April 18, 2012
See more answers
Q:

My package :c

A:

Thank you for your question.

I am sorry you are having a problem with your order. I recommend calling our online customer service number. The number is 1-800-349-4358. They handle all online purchases and should be able to resolve this problem. I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 02, 2012
Q:

My Craftsman garage door opener is very old and I can't find it on the website. It is a model 139.53600. How do I reprogram the wired keyless entry?

A:

Pry the front panel off the receiver mounted to the wall of the garage. Move the slide switch from operate to program. Enter your new 4 digit code. Move the slide switch back to operate. The keyless will work now with the new code.

Read More
Jimmy K -
Sears Technician