Model #UD-205 KENWOOD Tabletop Systems

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

sewing machine

A:

Thank you for your question. 
 
 
I am sorry we do not have the instructions for threading the unit. I searched for a copy of the manual for you but did not have any luck finding a free copy. I was able to find a site that has a PDF copy of the manual for sale. Click here to be taken to the site to order the manual. 
 
 
Thank you for using Manage my life.  Mark

Read More
Mark T -
Sears Technician
May 11, 2013
Q:

I have a Sears leaf blower 205 mph, will not start. Combustion chamber is 60 psi, is that OK? All else works.

A:

If you are pulling the starter rope fast the compression should easily reach 90 psi. 60 psi is borderline enough compression to start. It sounds like you have a problem internally in the engine.

Read More
Jimmy K -
Sears Technician
Q:

KitchenAid Electric Range Stopped Working.

A:

Thank you for your question on the why the bake is not working.

Please try the broil function to see if it will work?

If it does it will tell us that there is power to the board.

There are a number of reasons why this would happen.

The bake element could have failed.

There are two separate relays on the control board that may have failed which would mean you would have replaced the control board.

I will give you a link that shows you how to check out this bake circuit.

If you feel comfortable with doing some diagnosis with a multi meter you may be able to find out if the bake element is good or bad.

You will have to remove the element from the oven before performing this test.

Repair Clinic video .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Please reply with the exact model number so I can look at the circuit to make sure I am giving you the correct information.

Please let me know what you have found, and we can continue our troubleshooting based on that.

Sam A.

Read More
Sam A -
Sears Technician
August 09, 2011