Model #U6470-910 HOOVER Vacuum, Upright

  • Turbine Driven Hand Tool
    3 Results
  • Handle, Housing, And Motor
    3 Results
  • Hood And Agitator
    3 Results
Find part by diagram >

Question and Answers

Q:

Part for Schwinn 910 Elite stationary bike

A:

I found a Schwinn Elite Bike listed on our Sears PartsDirect website. The parts for that bike may match the one that you have. Here is a link for that bike: Schwinn Elite Bike -- Black.

 

If that does not help, let us know and we will research that part further. 

Read More
Lyle W -
Sears Technician
May 13, 2013
A:

Hello Blair. I searched for information on that specific Schwinn bike but I was unable to find any information. You may be able to find parts by contacting Schwinn directly at 1-800-605-3369.

Read More
Lyle W -
Sears Technician
May 17, 2013
See more answers
Q:

306233791 Craftsman Planer-molder

A:

Thank you for your question on the Planer Molder cutter bits.

These machines where almost exactly a like except for markings so the cutter bits you are referring to will fit the Belsaw 910/912.

The Sears 306.233791 and the 910/912 use the same internal parts.

I hope this information will help you.

Sam A.

Read More
Sam A -
Sears Technician
November 07, 2011
Q:

How can I remove the plastic sleeve (key 20) from the upper body arm (key 75) in a Nordic Track Model CXT910 elliptical trainer?

A:

Thank you for your question on the removal of the sleeve on the Nordic Track.

If you remove lower chrome tube(21)from the foot pedal and then remove the set screw (72) on the inside of the upper tube (75) you should be able to pull on the lower tube and pull it out of the upper tube.

I hope this was of some help.

Sam A.

Read More
Sam A -
Sears Technician
July 11, 2012
A:

Thank you for the update. I will give the parts picture I have to see if that will help you. You will need to completely remove that screw in question and then you may need to use a pair of needle nose pliers to grab the sleeve to pull it out of the upper tube. Please keep me update as to your progress. Sam A.

Read More
Sam A -
Sears Technician
July 13, 2012
A:

Thank you for the update. I do not know what the plastic material is made out of, but I was thinking that you were in the process of replacing the sleeve and you could get a hold of it with a pair of needle nose pliers. When they put these together they have some lubricant they put on the parts and because of its age it may have solidified and is now hold the plastic to the upper arm. I am sorry but I do not have any other suggestion for removing the sleeve. Sam A.

Read More
Sam A -
Sears Technician
July 16, 2012
See more answers