Model #SUPER PRO MAC 610 13-600041-23 MCCULLOCH Chainsaw

  • General Assembly
    3 Results
  • Powerhead And Oiler Assemblies
    3 Results
  • Chain Brake Assemblies
    3 Results
  • Fan Housing And Fuel Tank Assemblies
    3 Results
  • Carburetor Assembly
    3 Results
  • Carburetor
    3 Results
  • Carburetor
    3 Results
  • Brake Housing
    3 Results
Find part by diagram >

Question and Answers

Q:

Pro Mac Mcculloch chain saw 610, Model # 60041

A:

Thank you for sending the model number for you McCulloch chain saw.

The model 610 is a good model saw.

Do you have a question about the saw?

I will glad to help you.

Sam A.

Read More
Sam A -
Sears Technician
June 05, 2012
Q:

We purchased a 30" gas freestanding LG double oven which was delivered on 2/23/13.

A:

I am not aware of any problems or common issues with that model of LG double oven. You are probably correct about the noise being caused by metal contracting. Since the oven is brand new, you may consider having a service technician examine it. The technician can check for any potential problems while the oven is still under warranty.

Read More
Lyle W -
Sears Technician
April 24, 2013
A:

Based on your description, I recommend that you have a service technician examine the range under the warranty. Based on that recommendation, you should not be charged for service if the technician finds that the noise is normal and nothing is wrong. Let the phone agent know that we recommended the service call and the will set up the warranty service. You should not have to worry that you will be charged anything based on my recommendation. If you need more help, let me know.

Read More
Lyle W -
Sears Technician
April 24, 2013
See more answers
Q:

McCulloch MAC 160S Chainsaw

A:

Thank you for your question.

 

I am sorry you are having a problem with the chain saw. If the chain will not tighten when you loosen the nuts and turn the adjusting screw, I suspect the adjustment pin on the clutch cover is broken or not positioned in the bar. I found a video that shows how to replace the adjustment pin. The video also shows how the pin should fit into the bar. Click here to watch the video. 

 

I hope this is helpful. Please let me know if you need further assistance.

 

 

 

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
November 05, 2013