Model #SS1 NAKAMICHI Tabletop Systems

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers


how much would it cost to repair unit with bad thermal cutoff JES1453SS1SS Ge Microwave


Thank you for being Sears’ valued member and for contacting with your question about your microwave. I am so sorry the thermal cutoff needs to be replaced. I know what a time saver the microwave is and I am sure you want this issue fixed quickly.  In this case I recommend you contact our Service Department. Our service  advisor will be able to tell you the current technician charges. 
Here at we do not give diagnostic or repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. Special equipment is needed to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service. 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project. 
Thank you for your understanding in this matter and I hope we can help you with any other questions and repairs in the future. Thank you for choosing Sears.

Read More
Rachel Morgan -
Sears Technician
March 26, 2015

how to replace the door panel GDT580SSF2SS Ge Dishwasher


Thank you for choosing sears I would be happy to help you with your dishwasher. Upon researching model GDT580SSF2SS ;

1. Unplug dishwasher or remove power from dishwasher and shut off water supply.

2. Remove the lower access panel located under the dishwasher door. The lower access panel is secured by screws that you will have to remove.

3.  Once you have the lower panel removed you can disconnect the switches connected to the door and remove the door by unscrewing the hinges and pulling the door out.

4. After removing the door you can lay it on a padded table and remove the inner panel ( secured by screws, that you will have to remove) to get to the handle.

5. With the inner panel off you can unscrew the handle and remove the outer door panel, once you install the outer door panel you can reverse the steps listed to reassemble the unit.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
January 12, 2015

Blade brakes 917288570 Craftsman Tractor


Thanks for using, and for being a valued member. 

Once the deck is removed, you can easily replace the brake arm. The cam roller is used to disengage the brake when the deck is engaged. Once the arm is attached, install the spring to the arm and the bracket to hold tension on the arm. I have included good photos of a fully assembled brake arm with the torsion spring in place in this post directly below for visual help:

I hope this helps and thanks for using We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 07, 2014