Model #SP-WG200 STEELE PRODUCTS Power Washer, Gas

  • Power Washer
    3 Results
Find part by diagram >

Question and Answers

Q:

What does the code SP indicate on the front loading HE2 washer?

A:

I don't find information regarding the SP code on this type of washer. There is an SD code that indicates a suds lock or oversudsing condition. This could be caused by using too much detergent or not using HE (High Efficiency) detergent. Usually, the washer will drain properly after the suds dissipates. Use a Drain/Spin cycle to drain and spin the washer.

This code can sometimes be displayed when you have a clogged drain or an obstruction in the drain pump. Make sure that your drain hose is not kinked or clogged. If you suspect that the drain pump is clogged, you can follow the tips in the link of a previous answer: Why am I getting error codes SD and F21 on my Kenmore HE2+ washer?

If you need more help, resubmit your question with additional details and the full model number of your HE2 washer.

Read More
Lyle W -
Sears Technician
Q:

Where can I find an owner's manual for a Lincoln welder machine sp 135 t?

A:

I am sending you a link to a page where you can download or print a users manual for the welder.

Read More
Jimmy K -
Sears Technician
May 26, 2009
Q:

Why does my Kenmore sewing machine model 385.19110 only display the SP code after changing the fuse?

A:

I reviewed the technical information on this sewing machine but I did not find information on the SP code. The owner's manual does not cover this code. On some machines, this code is shown during a diagnostic test mode. Try completely unplugging the sewing machine for 5 minutes and then power it back up to see if it will work properly. If you are not able to clear this display and operate the machine, it will likely need to be serviced by a technician.

Read More
Lyle W -
Sears Technician
November 18, 2009