Model #SE-100-270ET9 KENMORE Water heater

  • Replacement Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my microwave displaying "SE" and not come on?

A:

The "SE" error code is indicating a shorted key pad or a failed computer board. The key pad is more likely the failure rather than the computer board.

I recommend calling a service technician to diagnose and repair your microwave.

Read More
Joey S -
Sears Technician
A:

If you are seeing that SE error then you will probably need to have that keypad replaced.

Read More
Lyle W -
Sears Technician
August 09, 2012
See more answers
Q:

What does the code SE mean on a Kenmore microwave

A:

Without knowing the model number of your microwave I will not be able to provide any model specific information. The "SE" fault code on Kenmore model 401.8008370 means a shorted key on the touch panel or smart board. See link below. The microwave is repairable. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

What does the error code "SE" mean on my microwave clock display?

Read More
Joey S -
Sears Technician
June 09, 2010
Q:

What do the letters "-SE-" in the window mean?

A:

The "SE" error code implies a shorted key panel/membrane switch. This type of repair will require a service technician. NOTE: DO NOT attempt to repair it yourself. Microwaves inherently store 10,000 volts which can cause severe bodily injuries or it could be fatal.

Call Sears at 1-800-4MY-HOME or 1-800-469-4663 to set up a service appointment.

Read More
Joey S -
Sears Technician
August 26, 2010