Model #S3061-030 HOOVER Vacuum, Canister

  • Agitator
    3 Results
  • Cordreel, Mainhousing
    3 Results
  • Hose, Cleaningtools
    3 Results
  • Motor Assembly
    3 Results
  • Powerednozzle
    3 Results
Find part by diagram >

Question and Answers

Q:

what is the correct spark plug gap for model 37000 lawn mower

A:

Thank you for your question.

I will be happy to assist you. The spark plug gap should be set to .020. The manual has a misprint in the trouble shooting section. I posted some of the engine specifications from the manufacturer in the image below. Click on the image to enlarge.

I am sorry for any confusion.

Please let me know if you need further assistance on the mower.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 24, 2012
A:

The engine model number on your mower should be 09P702-0008-F1. This engine is different from those listed on the link you provided. I was able to find the manual from Briggs and Stratton. Click on the link below to load it. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 25, 2012
A:

I am glad I could help. I have contacted the manufacturer about this. The new manuals should have the correct information. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 27, 2012
See more answers
Q:

What is the correct gap setting on my lawn mower spark plug?

A:

The plug should be set at .030 which is the correct gap setting.

Read More
Joey S -
Sears Technician
April 29, 2009
Q:

How does electronic clutch work on DYT 4000 yard tractor?

A:

Based on your details there could be a loose wire connection, weak voltage supply to the electric clutch, weak battery, PTO switch or the clutch may need adjusting or replacing. I added some information in the image below. I recommend checking the voltage supply first. When voltage is applied to the clutch it causes the two halves to magnetically come together which causes the drive pulley to spin the blade belt. See image below for troubleshooting.

Read More
Joey S -
Sears Technician
October 20, 2009