Model #S2100E1WW GE residential washers

  • Controls & Backsplash
    3 Results
  • Cabinet, Cover & Front Panel
    3 Results
  • Tub, Basket & Agitator
    3 Results
  • Suspension, Pump & Drive Components
    3 Results

Error Codes

Error Code:



Question and Answers


GE Washing Machine S2100E1WW Tub overflowswe have replaced the timer and cleaned out the water leavel switch


I assume the water will stop entering the washer when you shut the washer off. If you have to shut the water supply off in order to stop the water flow then you need to replace the water inlet valve.

If the air hose and air dome is clear of any blockages and the air hose does not have any holes, replace the water level pressure switch. The yellow/black wire and the Brown wire must break contact in the pressure switch in order to stop the flow of water. Note: Be sure all the water has drained before reattaching the air hose back to the pressure switch. Also make sure the nipple on the air dome at the bottom of the tub is clear and not restricted. NOTE: Disconnect the power cord from the power source before servicing the washer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
September 10, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show