Model #RX-570 PIONEER receivers

  • Cabinet
    3 Results

Question and Answers

Q:

Instruction Manual for Rex Portable Blindstitch Hemming Machine RX 518 947408

A:

Thank you for your question on the Blind stitch hemming sewing machine.

I could not find it in a Rex model but I will send you a manual for the WSM CM 500. Your model and the WSM and the Consew 75T are almost exactly a like except for color.

I will send the manual to your e-mail address.

Sam A.

Read More
Sam A -
Sears Technician
October 18, 2012
Q:

Lower Blade guard-10 inch compound miter saw-Model N. 137.212360

A:

Thank you for your question on the lower blade guard coming in contact with the spinning blade.

You are correct in that the blade at no time should come into contact with the lower blade guard.

As you start the saw motor and begin to bring the arm down the lower blade guard should pivots up out of the way of the blade and then as the arm returns to the up position it should come back down to cover the blade while the blade is still turning. Even if the blade is still rotating the blade should not touch the lower guard.

Please examine the saw to see if the blade guard has been damaged. This is a real safety issue and I would suggest taking the saw in for service if you cannot identify what caused the blade to cut the lower guard. Also please check the saw for any damage to the motor and arm assembly.

If you have any pictures you can send me, perhaps I can see why this happened. Please do not use the saw with a damaged lower blade guard.

Sam A.

Read More
Sam A -
Sears Technician
July 05, 2012