Model #RRL-8X-P76438-3M AMANA countertop microwave

  • Antenna/hardware
    3 Results
  • Blower/wiring Harness
    3 Results
  • Outer Cabinet
    3 Results
  • Magnetron/transformer
    3 Results
  • Control Panel
    3 Results

Question and Answers

Q:

What causes an 8x blinking led error on a Sony Bravia?

A:

The error suggests that the audio circuit might be damaged. Technology has made the size of these components so compact that traditional component level repair is usually not an option. The circuit board most likely to be required is the AU board. I recommend you visit Sears repair site here to get an estimate for a home diagnostic to confirm this. There the tech will confirm the need of the part and give you a cost of the part to your area. I tried to link it from our parts site Sears Parts Direct but was unable to find it listed.

Read More
David A. - Personal Solutions Manager -
Sears Technician
June 27, 2009
Q:

New belt on my 3" dustless belt sander #315.117150

A:

Thank you for your question.

I can understand wanting the sanding belt to stay on the sander.

I see only one reference to the tracking screw in the manual.

It is the knob just below the front handle and turning this screw clockwise or counter clockwise when the unit is running will track the belt to stay in the middle of the platen.

It appears that maybe the tracking screw is not connected to the front roller which is how it does its tracking. Please check this area against the parts list to make sure all the parts are there and it is connected to the front roller yoke assembly.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
March 31, 2011
Q:

What is the sealant used on Kenmore washer?

A:

Thank you for your question and I understand your concern.

You are correct; it is 3M industrial sealant. The part number is 27615P which can be ordered from SearsPartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 05, 2012