Model #REP 6000R RAMSEY winch

  • Unit
    3 Results
  • Switch Assembly Parts
    3 Results
  • Solenoid Assembly Parts
    3 Results
  • Roller Type Fairlead 274018
    3 Results
  • Jeep Sportwagon Fairlead 422015
    3 Results
  • Hawse Type Fairlead 422017
    3 Results

Question and Answers

Q:

How do you rep[lace an impeller on dishwasher 15319100

A:

Sorry to hear you are having problems with your dishwasher. If the dishwasher is, spraying water in a wash cycle the impeller is going to be fine. This dishwasher uses the same impeller for wash and drain. I recommend turning the dishwasher to a drain cycle. When the dishwasher is running listen for water trickling from the drain hose. If you hear some water coming out of the drain the problem could be the piston nut assembly in the back of the dishwasher. in a drain cycle the piston nut is supposed to pop up and seal the opening into the tub so the water is forced out the drain hose. The piston threads into the collector box from the inside of the tub. I have marked the piston in the image below with a red box.

If the piston is not the problem I recommend checking for a blockage where the drain hose connects to the drainpipes or garbage disposal. If no blockages are found in this area, disconnect power to the dishwasher and remove the lower dish rack. Pull the sump inlet cover off and check for a clog in the sump area.

You could have restriction in the drain hose or the flapper valve area of the solenoid drain valve assembly. With electrical power to the dishwasher disconnected, disconnect the drain hose on the bottom of the dishwasher. Manually push the plunger down and see if water will drain out of the dishwasher with the drain hose disconnected from the drain valve assembly. If it does, then you could still have a restriction in the drain hose or the solenoid is not pulling the plunger down properly.

If water does not drain when you manually push down the plunger, then you could have a restriction in the body of the drain valve assembly. I recommend calling a service technician to diagnose and repair your dishwasher if the above tips do not help you resolve the drain problem.

Thank you for using Manage my life.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Mark T -
Sears Technician
August 14, 2010
Q:

How old might a Kenmore dishwasher model 363.1414598 be? My landlord says it is 2yrs old, but to me it appears much older. The Kenmore rep wasn't able to help.

A:

The serial number determines the age of a product. I have checked the model number you submitted and a ballpark production date is a 1996 model.

Read More
Mark T -
Sears Technician
August 13, 2010
A:

You are correct it is Feb. 1997

Read More
Mark T -
Sears Technician
August 13, 2010
See more answers
Q:

I am looking for information on converting my portable kenmore dishwasher to under the counter. When we purchased it, they sales rep said we would be able to.

A:

I added three images below with instructions how to convert your dishwasher to an under counter dishwasher. I also added instructions how to install the dishwasher once converted. The part number for the conversion kit in the color Black is #4317856 and for the conversion kit in the color of White is #675778.

Read More
Joey S -
Sears Technician
August 20, 2010