Model #RED4440VQ0 ROPER Residential Dryer

  • Cabinet Parts
    3 Results
  • Top And Console Parts
    3 Results
  • Bulkhead Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers


Why does my Roper dryer takes 2-3 cycles to dry the clothes?


The dryer taking a long time to dry the clothes can be an inconvenience and a waste of electricity. I am adding a link below that will provide you with some good troubleshooting tips. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
March 13, 2012

Thanks for contacting I understand how frustrating it is having a dryer take a long time to dry the clothes. We are here to help. A clogged vent will definitely cause long dry times. Since your lint screen is on top of the dryer, you can perform this vent test.

  1. Remove lint screen.
  2. Place a piece of paper and cover the hole where the lint filter goes.
  3. Turn dryer on and observe the piece of paper.
  4. If the paper just lays flat and don't move or it blows it up in the air your vent is obstructed or clogged. You need to clear and clean vent.
  5. If the paper try's to suck in, that is normal vent is ok dryer has a problem.
After you perform the test above and if the answer is #5. Then the dryer need to be taking apart and cleaned. The image below will help you do that. Unplug the dryer first, before you take it apart.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit and click on the red Start now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using

Read More
John H -
Sears Technician
March 14, 2012
See more answers

Top Parts