Model #RC-X740C JVC Compact Disc

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

I need help installing inlet needle and spring assembly part number 631021B- RC. for outboard motor

A:

I don't think the parts you received are for the carburetor you are working on. I can't pull up the 631021B-RC part number and the original part number you give is no longer available for ordering.

I suggest you contact whoever you ordered the parts from and tell them your problem.

Read More
Jimmy K -
Sears Technician
April 07, 2009
Q:

treadmill ,make is Sportcraft TX5.0 RC model # 04050 ..................will run for 7 seconds then stop with error 3 on the display board. .

A:

That error 3 on your Sportcraft treadmill indicates that you have a problem with the speed sensor. There is speed sensor on the right side of the front roller. You can unplug the treadmill and remove the cover. You will probably find 4 screws (2 on the front and one on each side). Once you remove that cover, you should see a sensor on the right side that detects speed. If that speed sensor is dirty or loose, you may be able to fix the problem by adjusting it and/or cleaning it. I did not find replacement parts for this treadmill available. If that speed sensor is broken and cannot be repaired, then you will need to replace the treadmill.

 

 

 

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
May 02, 2013
Q:

File size for sharpening saw chain 75305592 79246

A:

Thank you for your question.

 

I will be happy to assist you. I looked up the model number you submitted. The 8 inch chain on your model requires a 5/32 file to sharpen it. You can order the file from the following link. 5/32 chain saw file.

I hope this is helpful. Please let me know if you need further assistance.

 

 

Thank you for using Mange my life.

 

 

Mark T.

Read More
Mark T -
Sears Technician
September 30, 2013