Model #RBD305PDB14 WHIRLPOOL built-in oven, electric

  • Lower Oven Parts
    3 Results
  • Upper Oven Parts
    3 Results
  • Lower Oven Door Parts
    3 Results
  • Upper Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results

Error Codes

Error Code:



Question and Answers


RBD305PDB14 Whirlpool Control Panel


Thank you for your question and I understand your concern.

I would not be able to recommend any parts until some voltage measurements have been made and some Ohm resistances made.

I added a couple of images below showing what the power transformer windings should measure in Ohm resistance. If it measures according to the information in the image below, then the voltage supply to the transformer will need to be made. The voltage is measure across terminal P16-5 and P16-7 which should be 120 VAC. The Ohm resistance of the transformer is also measured across P16-5 and P16-7 and then across P16-2 and P16-3. See images below. NOTE: I do not recommend making any voltage measurements unless you have experience and feel safe and confident in doing so; otherwise I strongly suggest calling a service technician.

I highly recommend calling a service technician with the proper equipment, knowledge and experience to properly diagnose and repair your oven.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

 If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Joey S -
Sears Technician
November 06, 2013

Recommended maintenance parts & accessories

Show 3 more
No more item to show