Model #R-9078-MW ROADMASTER treadmill

  • Treadmill
    3 Results
  • Treadmill Main Assembly
    3 Results
  • Treadmill Main Assembly Page 2
    3 Results
  • Treadmill Main Assembly Page 3
    3 Results

Question and Answers

Q:

Kenmore microwave - cooktop light under MW won't work

A:

Thank you for your question.

I am sorry you are having a problem with the microwave. If you are sure the light bulbs are installed correctly I would suspect a loose wire connection or a faulty control board. Because of the extremely high voltage a microwave generates and can store even when unplugged, we do not give repair information on them. We strongly recommend having a service technician replace the control of the microwave. I hope you understand we do not want a customer getting serious injured or worse. We will gladly give repair advice on all other appliances. You can have the microwave repaired at your home by a Sears technician. Here is a link for the website to set up service: Sears Home Services .

Thank you for using Manage my life

Mark T.

Read More
Mark T -
Sears Technician
November 16, 2010
Q:

bulb replacement KEMS307DWH4 Kitchenaid 30" built-in electric oven/mw

A:

Thank you for your question and I understand your concern.

In order to access and replace the microwave oven cavity light will require removing the microwave. This will require a service technician due to high voltage stored even when disconnected from the power supply. It may not have a faulty light bulb. It could have a faulty power transformer that powers up the light.

I am sorry, but we do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.

Normally at ManageMyLife.com we like to help you with all of your repairs, but our expert advice is that microwaves are just too dangerous.

You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME. We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.

Read More
Joey S -
Sears Technician
January 25, 2013
Q:

how do I R & R this part touchpad #97013466

A:

There is not a procedure available for the replacement of the touchpad on that older Kenmore range hood. These general tips may help you complete that repair:

Shut off the house circuit breaker to disconnect electrical power and remove the filter on the side that has that touchpad. You may be able to disconnect that wires and pull that touchpad out after removing that filter. If not, then you may need to remove the blower motor and/or other components. The owner's manual/installation guide will normally provide directions for removing the blower motor. You may need to pull the range hood down to access that touchpad. You can view the parts image for the blower on this page: Kenmore Range Hood Model 233.5548910 Parts . The parts diagram may help you access and replace that part.

If you get to the point where you need to have a service technician replace that touchpad, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 15, 2013
A:

Here is the image.

Read More
Lyle W -
Sears Technician
January 15, 2013
See more answers