Model #PWP-425(5HCD) SMITH CORONA Word Processor

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't the temperature setting go down below 425 degrees?

A:

The model number you submitted is missing a letter and possibly read incorrectly too. The symptom you have indicates a failed oven control board. The control board could cost $180.00 or more depending on the model. Since I do not have a valid and complete model number I will not be able to provide the cost of a new electronic oven control board.

Resubmit your question with the correct model number for specific information.

Read More
Joey S -
Sears Technician
Q:

How do I fix my Kenmore Ultrasoft 425 water softener.

A:

Thank you for your question. I am sorry you are having a problem with the water softener. By what you have sated I suspect the problem is with either one of the distributors or the resin bed is full of sediment. To repair the softener, bypass the water and remove the valve body. The dump the resin and flush the tank out. Next, clean the distributors with a brush. Once they are clean, reassemble the softener with new resin. This should cure the problem. The parts can be ordered from out parts website: Sears Parts Direct .

Please let ne know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 05, 2011
Q:

What are the color bands on the R22 resistor of a circuit board for a Kenmore water softener model 625.388460?

A:

We don't have access to the component specifications for the resistors on that control board. The photograph that we have of the part does not show the resistors on the board. The original control board part 7268633 now substitutes to a new part number 7285716. You may need to order the new control board to fix your problem.

You can order a new control board from the Sears PartsDirect website if necessary.

Read More
Lyle W -
Sears Technician
September 18, 2009