Model #PV-4903 PANASONIC VCR

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore washer #4903 power

A:

Hi Gregg,

Thank you for submitting a question to Manage My Life.

This is most likely an issue being caused by a bad main control. Check all your wiring and connections, and you may want to try a different outlet. In order to properly diagnose this issue, voltage checks will need to be made. If you have an ohm/volt meter and are confident in your technical abilities, please reply below and I will be happy to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
December 06, 2011
Q:

My Kenmore washer isn't sometimes doesn't drain when I run a wash cycle

A:

Hi Micah,

Thank you for submitting a question to Manage My Life.

If your washer drains intermittently, you may have a loose wire connection. Check the wiring and connections on the control board and the pump motor. I am including a set of images below that will help with this. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
February 02, 2012
A:

Chris,

I cannot be sure what checks the service technician performed. Did you follow any of the troubleshooting I included in the images above? Please perform the troubleshooting for this issue and reply to this post with the results. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
April 10, 2012
See more answers
Q:

I would like to have the manual for my washer and dryer model numbers, 4903 and 8903

A:

Here is the owner's manual for the Kenmore washer with stock number 4903 (full Kenmore model number 402.49032011): Washer Owner's Manual . Here is the installation guide for that model: Washer Installation Guide . Here is a link for the dryer owner's manual: Dryer Owner's Manual . Here is the installation guide for the dryer:Dryer Installation Instructions . If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
April 07, 2012