Model #PRO MAC 3505 11-600035-04 MCCULLOCH Chainsaw, Gas

  • General Assembly
    3 Results
  • Powerhead Assembly
    3 Results
  • Chain Brake Assembly
    3 Results
  • Carburetor Assembly
    3 Results
  • Bar And Chain Chart - Text Only
    3 Results
  • Specifications- Text Only
    3 Results
Find part by diagram >

Question and Answers

Q:

Pro Mac Mcculloch chain saw 610, Model # 60041

A:

Thank you for sending the model number for you McCulloch chain saw.

The model 610 is a good model saw.

Do you have a question about the saw?

I will glad to help you.

Sam A.

Read More
Sam A -
Sears Technician
June 05, 2012
Q:

McCulloch MAC 160S Chainsaw

A:

Thank you for your question.

 

I am sorry you are having a problem with the chain saw. If the chain will not tighten when you loosen the nuts and turn the adjusting screw, I suspect the adjustment pin on the clutch cover is broken or not positioned in the bar. I found a video that shows how to replace the adjustment pin. The video also shows how the pin should fit into the bar. Click here to watch the video. 

 

I hope this is helpful. Please let me know if you need further assistance.

 

 

 

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
November 05, 2013
Q:

Why is the ice maker leaking on my Kenmore refrigerator?

A:

According to your details, you indicated that the ice maker is leaking water on the floor when the unit is turned on. This symptom suggests that the leak is likely in the water tubing between the water valve and the ice maker module. I recommend unplugging the refrigerator and checking the water supply tubing from the water solenoid valve to the connection on the top of back outside refrigerator panel where it enters the freezer compartment. You will need to pull the bottom cardboard service panel off to access the solenoid water valve. If you find a leak in this water supply tube, then it will need to be replaced. This should fix your leaking problem.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
November 03, 2008