Model #PL-STYLUS8 EPSON Printer

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

Hello, I am trying to repair craftsman lawn mower # 917376080,cleaning done per manual, now need to fit two spring (Return and other one) pl let me know howtodo

A:

Thank you for your question.

I will be happy to assist you with the mower. I have posted an image below showing how the springs connect to the mower. Click on the image to enlarge it. I have found using needle nose pliers make connecting the springs easier.

If you need further assistance, please reply below with more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 13, 2011
Q:

The power does not come on my Protron TV.. The cord is good and the tv is only 3 years old.

A:

Unplug the set and plug it back in, hit the power button a few times and repeat. Since you don't mention a power surge or the losing power then it could be a failure in the TV itself. This TV has a power supply board that is in charge of converting your AC into DC and distributing it to where it needs to go. My first guess would be that some filter capacitors have gone bad and the voltage is slightly off. That is why attempting to turn it on multiple times can get it on. This is not a fix but an indicator that you are on the right track. Find a local shop and see if they are willing to take a look inside for you. A lot of the times, the caps are visible swollen and can be replaced to get it working again. If the technician cannot see anything wrong visibly then it becomes a challenge to find what is missing since there is little service information on these sets.

Read More
David A. - Personal Solutions Manager -
Sears Technician
June 02, 2010
Q:

Noise while starting heat in my home baseboard and heating pipe

A:

Thank you for your question.

Having noise in your heating pipes can be annoying.

Your research is correct, it is air trapped in the pipes. This is a natural occurrence with the air coming out of the water.

  • The system will need to be bled. Since this is a hot water boiler system I would suggest that you have a Heating Hydronic specialist technician bleed the air from the system for you and then however your system was put together you can watch to see how he does it and will be able to safely do it yourself the next time.

A hydronic hot water heating system is not something you want to work on yourself.

  • It is very easy to get burned or unbalance the system to a dangerous point.

I do not want you to get hurt.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 11, 2010