Model #PDP-S12-LR PIONEER Speakers

  • Speaker
    3 Results
Find part by diagram >

Question and Answers

Q:

What does "LR" error code indicate?

A:

Without knowing the model number of your washer I will have to assume that it's a Maytag washer. The "LR" error code indicates a "Locked Rotor" This means it does not see the motor operating. If this is an intermittent code the likely failure is either a loose wire connection at the motor or at the motor control board. If the motor will not operate at all would likely indicate a failed motor control board.

I recommend calling a service technician to diagnose and repair your washer.

Read More
Joey S -
Sears Technician
April 17, 2009
Q:

I have just received a handsfree headset at my job(Plantronics Telephone Headset system S12) it keeps making an annoying clicking sound in the backround.

A:

I see that Joseph P. provided a link to the Plantronics website in the above response. I recommend that you check the troubleshooting section of that link. If that does not help, then you could have a problem with the phone line or the connection at your job. I recommend that you discuss the headset problems that you are having with your employer.

Read More
Lyle W -
Sears Technician
March 16, 2011
Q:

manual for a swimming pool pump

A:

Thank you for your question on the pool pump.

If the pump only makes a humming sound, the motor may be seized up or the impeller jammed with some debris.

First REMOVE POWER TO THE PUMP.

You may have to take the front housing off the pump and see if you can turn the pump impeller by hand.

In the picture in the web site it would be 5A or 5B depending on the style of pump you have.

Here is a web-site that may be able to help you further.

LR Jacuzzi pumps .

I hope this will help you.

Sam A.

Read More
Sam A -
Sears Technician
September 03, 2011