Model #PD-4350-S PIONEER Compact Disc

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers


9030 Singer Sewing machine PD test question 9030 SINGER SEWING MACHINE


Thank you for your test question on the Singer model 9030 sewing machine.

I will be happy to help you with your sewing machine if you will give me a little more information as to what you need.

Please reply with your question about the sewing machine.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
August 20, 2012

Door latch broke on over stove microwave


Thank you for your question and I understand your concern.

It would likely cost as much or more to have the door latch replaced by a service technician as it would to purchase a new over the range microwave. I added a link to where you can shop and compare prices and features on the new over the range microwaves. 

Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VDC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as replacing fuses, can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. 

It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. 

You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME

We thank you for your understanding in this matter and hope we can help you with other questions and repairs in the future.  

Read More
Joey S -
Sears Technician
October 28, 2013

kenmore s/s fridge


I don't have an illustrated procedure or video that replacement of that cold control thermostat in your Kenmore refrigerator. The parts diagram of the control section is shown in the image below. You will need to rely on that parts diagram and your personal observation of the control area to determine how to complete this repair. Unplug the refrigerator to disconnect electrical power before beginning this repair. Safely store the food if necessary. You can look for screws under that control housing that will release it so that it can drop down. Once you release that control housing, you should be able to remove the wiring from the old cold control thermostat and pull it out. Observe how the sensor is positioned as you pull the old thermostat out. You will need to route that sensor for the new thermostat in the same manner.

I hope that this information helps. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 12, 2011