Model #NTTL09711 NORDICTRACK Treadmill

  • Walking And Motor Belts
    3 Results
  • Console Base/handrail
    3 Results
Find part by diagram >

Question and Answers


I have a Nordic Track treadmill model NTTL09711. How do I adjust the walking belt?


Unfortunately, this particular manual is not currently available electronically at Manage My Home, but I believe that I can help you.

Provided that nothing is damaged, the walk belt can easily be adjusted to get it centered again. To center a walk belt running too far to the right do the following:

  1. Remove the safety key and unplug the treadmill.
  2. Look at the back edge of the walk belt and you will see an Allen bolt on the end of each side rail (just to either side of the walk belt) these are the rear roller adjustment bolts
  3. Use an Allen wrench to turn the left rear roller adjustment bolt counterclockwise 1/4 of a turn
  4. Turn the right roller adjuster clockwise 1/4 turn
  5. Plug in the treadmill, insert the safety key and run the treadmill for a few minutes.

If the belt is still too far to the right then do that same procedure again. If it is too far to the left now, then turn the adjust bolt 1/8 turn each in the opposite directions of those listed above. The goal is to get the belt consistently running as close to center as possible. Provided you use small increments and always turn each screw the same amount the overall tension of the belt will remain okay and the belt should be simple to center.

If you require further assistance please resubmit question with more details. I will be looking forward to helping you again in the near future.

Read More
Landell -
Sears Technician
January 06, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show