Model #MHC-331 Sanyo tabletop systems

  • No Image Available - Wards
    3 Results

Question and Answers

Q:

WHAT RECIRCULATING KIT IS NEEDED FOR G.E. MHC JVM1950sr1

A:

I see that Barbara H. posted a link for the installation guide on that model of GE microwave in the above response. Here is another link for that installation guide that may be easier to open and navigate: GE Microwave JVM1950SR1 Installation Manual . Page 19 of that manual shows how to position the exhaust fan for recirculation. Be sure that you unplug the microwave before pulling it down and adjusting that fan position. You will need a charcoal filter (part WBO2X1095) when operating the fan in that recirculation mode. I did not find that part available on the Sears Parts website. I did find it available from PartSelect.com. Here is a direct link for that part. Page 22 of the installation guide provided above shows how to install that charcoal filter. Page 29 of the owner's manual indicates that the charcoal filter needs to be changed every 6 to 12 months. Here is a link for that owner's manual in case you need it: GE Microwave JVM1950SR1 Owner's Manual .

This should be the information that you need to convert that microwave to recirculate the exhaust. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
July 03, 2012
Q:

LOOKING FOR THE CODE TO UNLOCK MICROHOOD (MHC) PURCHASHED 07/18/2009 FROM SEARS

A:

Thank you for your question and I understand your concern.

In order to provide model specific instructions I will need to have the model number of your microwave. If you have your Owner's manual it will have the instructions on how to un-lock the controls. If you don't have it, you can likely locate the Owner's manual at Manage My Life by clicking on Manuals and entering the model number or reply with the model number and I will be able to provide the instructions.

Read More
Joey S -
Sears Technician
June 15, 2011
Q:

how do i remove my drawer from my dresser?

A:

Thank you for your question.

I can understand wanting to get the dresser drawer out.

With use the drawer bottom can slip out the drawer front and hangs down and catches on the cross-rail so you cannot pull it out.

If it is like the one I have found line in the image below it is a six drawer dresser that you may have to access the drawer either from the drawer above of the drawer below. In some cases depending on how the dresser is built you may have to remove the back panel on the dresser and remove the cloths to be able to lift up on the drawer bottom to release it.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
February 17, 2011