Model #MCBC58DST VISSANI wine cooler

  • Cabinet Parts
    3 Results

Question and Answers

Q:

need instructions for installing temp probe mcbc58dst

A:

Thank you for your question and I understand your concern. The temperature probe has a harness attached to it which connects to the control board. On the lower right side inside the cooler is the temperature probe cover. Remove the cover and the probe. There is likely a harness connector to disconnect the old temperature sensor from the harness. Disconnect the harness connector from the harness leading to the control board. Reconnect the new temperature sensor probe and remount the probe. Install the cover. It's possible the sensor probe harness will have to be disconnected from the control board. If you do not feel confident in replacing the temperature probe, I highly recommend taking the wine cooler to your nearest Sears service center for repair. NOTE: Disconnect the power cord from the power source before servicing. You can also call 1-800-4-MY-HOME and schedule a technician to replace the temperature sensor.

Read More
Joey S -
Sears Technician
March 05, 2014

Recommended maintenance parts & accessories

Show 3 more
No more item to show